Program your radio.
Reads and backs up the radio, checks its model and firmware, then writes only the channel memory. No ads and no third-party code on this page.
01 // channels
No repeaters selected. Find repeaters near you and press program into radio.
| name | call | location | rx MHz | tx MHz | tone |
|---|
Names are made from the call sign and shortened to what the selected radio can show. Data can be wrong: check before you transmit.
02 // radio
This browser cannot talk to a programming cable. Use Chrome or Edge on a computer (Windows, macOS, Linux, ChromeOS).
Phones and tablets cannot program radios here; use the CHIRP file from the finder instead.
channels in radio
| ch | name | rx MHz | tx MHz | tone | bw |
|---|
?? // safety
- Read first, always. The radio memory is read and saved to your computer as a CHIRP image before anything is written.
- Identity check. The radio must identify as a supported model with a firmware version known to work. Unknown versions can be read and backed up, never written.
- Channels only. Only channel memory is written, and only the parts that change. Settings, band limits and calibration are never written.
- Verify. Verify reads the radio again and compares every channel with what was written.
- Restore. Open the backup in CHIRP and upload it to go back.
- Baofeng radios sold as "UV-5R" but built differently (UV-5R Mini, UV-5RM, UV-5R Plus/Pro, UV-5R III) use other protocols and are refused.